commit 59c3c3d

links: init

1@@ -0,0 +1,2 @@
2+/libnl-tiny
3+.gmake

 1@@ -0,0 +1,21 @@
 2+#!/bin/sh
 3+fdl(){
 4+	cmd_get=${cmd_get:-"$(
 5+		command -v aria2c ||
 6+		command -v axel ||
 7+		command -v curl ||
 8+		command -v wget ||
 9+		command -v wget2
10+	)"}
11+	# printf "$cmd_get\n"
12+}
13+_dl(){
14+fdl
15+case ${cmd_get##*/} in
16+         aria2c) set -- -d / -o  "$@" ;;
17+           axel) set -- -o       "$@" ;;
18+           curl) set -- -fLo     "$@" ;;
19+     wget|wget2) set -- -O       "$@" ;;
20+esac 
21+$cmd_get "$@"
22+}

  1@@ -0,0 +1,551 @@
  2+# Example wpa_supplicant build time configuration
  3+#
  4+# This file lists the configuration options that are used when building the
  5+# hostapd binary. All lines starting with # are ignored. Configuration option
  6+# lines must be commented out complete, if they are not to be included, i.e.,
  7+# just setting VARIABLE=n is not disabling that variable.
  8+#
  9+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
 10+# be modified from here. In most cases, these lines should use += in order not
 11+# to override previous values of the variables.
 12+
 13+
 14+# Uncomment following two lines and fix the paths if you have installed OpenSSL
 15+# or GnuTLS in non-default location
 16+#CFLAGS += -I/usr/local/openssl/include
 17+#LIBS += -L/usr/local/openssl/lib
 18+
 19+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
 20+# the kerberos files are not in the default include path. Following line can be
 21+# used to fix build issues on such systems (krb5.h not found).
 22+#CFLAGS += -I/usr/include/kerberos
 23+
 24+# Driver interface for generic Linux wireless extensions
 25+# Note: WEXT is deprecated in the current Linux kernel version and no new
 26+# functionality is added to it. nl80211-based interface is the new
 27+# replacement for WEXT and its use allows wpa_supplicant to properly control
 28+# the driver to improve existing functionality like roaming and to support new
 29+# functionality.
 30+CONFIG_DRIVER_WEXT=y
 31+
 32+# Driver interface for Linux drivers using the nl80211 kernel interface
 33+CONFIG_DRIVER_NL80211=y
 34+
 35+# QCA vendor extensions to nl80211
 36+#CONFIG_DRIVER_NL80211_QCA=y
 37+
 38+# driver_nl80211.c requires libnl. If you are compiling it yourself
 39+# you may need to point hostapd to your version of libnl.
 40+#
 41+#CFLAGS += -I$<path to libnl include files>
 42+#LIBS += -L$<path to libnl library files>
 43+
 44+# Use libnl v2.0 (or 3.0) libraries.
 45+CONFIG_LIBNL20=y
 46+CONFIG_LIBNL_TINY=y
 47+
 48+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
 49+#CONFIG_LIBNL32 is not set
 50+
 51+
 52+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
 53+#CONFIG_DRIVER_BSD=y
 54+#CFLAGS += -I/usr/local/include
 55+#LIBS += -L/usr/local/lib
 56+#LIBS_p += -L/usr/local/lib
 57+#LIBS_c += -L/usr/local/lib
 58+
 59+# Driver interface for Windows NDIS
 60+#CONFIG_DRIVER_NDIS=y
 61+#CFLAGS += -I/usr/include/w32api/ddk
 62+#LIBS += -L/usr/local/lib
 63+# For native build using mingw
 64+#CONFIG_NATIVE_WINDOWS=y
 65+# Additional directories for cross-compilation on Linux host for mingw target
 66+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
 67+#LIBS += -L/opt/mingw/mingw32/lib
 68+#CC=mingw32-gcc
 69+# By default, driver_ndis uses WinPcap for low-level operations. This can be
 70+# replaced with the following option which replaces WinPcap calls with NDISUIO.
 71+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
 72+# wpa_supplicant.
 73+# CONFIG_USE_NDISUIO=y
 74+
 75+# Driver interface for wired Ethernet drivers
 76+CONFIG_DRIVER_WIRED=y
 77+
 78+# Driver interface for the Broadcom RoboSwitch family
 79+#CONFIG_DRIVER_ROBOSWITCH=y
 80+
 81+# Driver interface for no driver (e.g., WPS ER only)
 82+#CONFIG_DRIVER_NONE=y
 83+
 84+# Solaris libraries
 85+#LIBS += -lsocket -ldlpi -lnsl
 86+#LIBS_c += -lsocket
 87+
 88+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
 89+# included)
 90+CONFIG_IEEE8021X_EAPOL=y
 91+
 92+# EAP-MD5
 93+CONFIG_EAP_MD5=y
 94+
 95+# EAP-MSCHAPv2
 96+CONFIG_EAP_MSCHAPV2=y
 97+
 98+# EAP-TLS
 99+CONFIG_EAP_TLS=y
100+
101+# EAL-PEAP
102+CONFIG_EAP_PEAP=y
103+
104+# EAP-TTLS
105+CONFIG_EAP_TTLS=y
106+
107+# EAP-FAST
108+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
109+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
110+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
111+#CONFIG_EAP_FAST=y
112+
113+# EAP-GTC
114+CONFIG_EAP_GTC=y
115+
116+# EAP-OTP
117+CONFIG_EAP_OTP=y
118+
119+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
120+#CONFIG_EAP_SIM=y
121+
122+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
123+#CONFIG_EAP_PSK=y
124+
125+# EAP-pwd (secure authentication using only a password)
126+CONFIG_EAP_PWD=y
127+
128+# EAP-PAX
129+#CONFIG_EAP_PAX=y
130+
131+# LEAP
132+CONFIG_EAP_LEAP=y
133+
134+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
135+#CONFIG_EAP_AKA=y
136+
137+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
138+# This requires CONFIG_EAP_AKA to be enabled, too.
139+#CONFIG_EAP_AKA_PRIME=y
140+
141+# Enable USIM simulator (Milenage) for EAP-AKA
142+#CONFIG_USIM_SIMULATOR=y
143+
144+# EAP-SAKE
145+#CONFIG_EAP_SAKE=y
146+
147+# EAP-GPSK
148+#CONFIG_EAP_GPSK=y
149+# Include support for optional SHA256 cipher suite in EAP-GPSK
150+#CONFIG_EAP_GPSK_SHA256=y
151+
152+# EAP-TNC and related Trusted Network Connect support (experimental)
153+#CONFIG_EAP_TNC=y
154+
155+# Wi-Fi Protected Setup (WPS)
156+CONFIG_WPS=y
157+# Enable WPS external registrar functionality
158+#CONFIG_WPS_ER=y
159+# Disable credentials for an open network by default when acting as a WPS
160+# registrar.
161+#CONFIG_WPS_REG_DISABLE_OPEN=y
162+# Enable WPS support with NFC config method
163+#CONFIG_WPS_NFC=y
164+
165+# EAP-IKEv2
166+#CONFIG_EAP_IKEV2=y
167+
168+# EAP-EKE
169+#CONFIG_EAP_EKE=y
170+
171+# PKCS#12 (PFX) support (used to read private key and certificate file from
172+# a file that usually has extension .p12 or .pfx)
173+CONFIG_PKCS12=y
174+
175+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
176+# engine.
177+CONFIG_SMARTCARD=y
178+
179+# PC/SC interface for smartcards (USIM, GSM SIM)
180+# Enable this if EAP-SIM or EAP-AKA is included
181+#CONFIG_PCSC=y
182+
183+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
184+#CONFIG_HT_OVERRIDES=y
185+
186+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
187+#CONFIG_VHT_OVERRIDES=y
188+
189+# Development testing
190+#CONFIG_EAPOL_TEST=y
191+
192+# Select control interface backend for external programs, e.g, wpa_cli:
193+# unix = UNIX domain sockets (default for Linux/*BSD)
194+# udp = UDP sockets using localhost (127.0.0.1)
195+# udp6 = UDP IPv6 sockets using localhost (::1)
196+# named_pipe = Windows Named Pipe (default for Windows)
197+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
198+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
199+# y = use default (backwards compatibility)
200+# If this option is commented out, control interface is not included in the
201+# build.
202+CONFIG_CTRL_IFACE=y
203+
204+# Include support for GNU Readline and History Libraries in wpa_cli.
205+# When building a wpa_cli binary for distribution, please note that these
206+# libraries are licensed under GPL and as such, BSD license may not apply for
207+# the resulting binary.
208+#CONFIG_READLINE=n
209+
210+# Include internal line edit mode in wpa_cli. This can be used as a replacement
211+# for GNU Readline to provide limited command line editing and history support.
212+CONFIG_WPA_CLI_EDIT=y
213+
214+# Remove debugging code that is printing out debug message to stdout.
215+# This can be used to reduce the size of the wpa_supplicant considerably
216+# if debugging code is not needed. The size reduction can be around 35%
217+# (e.g., 90 kB).
218+#CONFIG_NO_STDOUT_DEBUG=y
219+
220+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
221+# 35-50 kB in code size.
222+#CONFIG_NO_WPA=y
223+
224+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
225+# This option can be used to reduce code size by removing support for
226+# converting ASCII passphrases into PSK. If this functionality is removed, the
227+# PSK can only be configured as the 64-octet hexstring (e.g., from
228+# wpa_passphrase). This saves about 0.5 kB in code size.
229+#CONFIG_NO_WPA_PASSPHRASE=y
230+
231+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
232+# This can be used if ap_scan=1 mode is never enabled.
233+#CONFIG_NO_SCAN_PROCESSING=y
234+
235+# Select configuration backend:
236+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
237+#	path is given on command line, not here; this option is just used to
238+#	select the backend that allows configuration files to be used)
239+# winreg = Windows registry (see win_example.reg for an example)
240+CONFIG_BACKEND=file
241+
242+# Remove configuration write functionality (i.e., to allow the configuration
243+# file to be updated based on runtime configuration changes). The runtime
244+# configuration can still be changed, the changes are just not going to be
245+# persistent over restarts. This option can be used to reduce code size by
246+# about 3.5 kB.
247+#CONFIG_NO_CONFIG_WRITE=y
248+
249+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
250+#CONFIG_NO_CONFIG_BLOBS=y
251+
252+# Select program entry point implementation:
253+# main = UNIX/POSIX like main() function (default)
254+# main_winsvc = Windows service (read parameters from registry)
255+# main_none = Very basic example (development use only)
256+#CONFIG_MAIN=main
257+
258+# Select wrapper for operating system and C library specific functions
259+# unix = UNIX/POSIX like systems (default)
260+# win32 = Windows systems
261+# none = Empty template
262+#CONFIG_OS=unix
263+
264+# Select event loop implementation
265+# eloop = select() loop (default)
266+# eloop_win = Windows events and WaitForMultipleObject() loop
267+#CONFIG_ELOOP=eloop
268+
269+# Should we use poll instead of select? Select is used by default.
270+#CONFIG_ELOOP_POLL=y
271+
272+# Should we use epoll instead of select? Select is used by default.
273+#CONFIG_ELOOP_EPOLL=y
274+
275+# Should we use kqueue instead of select? Select is used by default.
276+#CONFIG_ELOOP_KQUEUE=y
277+
278+# Select layer 2 packet implementation
279+# linux = Linux packet socket (default)
280+# pcap = libpcap/libdnet/WinPcap
281+# freebsd = FreeBSD libpcap
282+# winpcap = WinPcap with receive thread
283+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
284+# none = Empty template
285+#CONFIG_L2_PACKET=linux
286+
287+# Disable Linux packet socket workaround applicable for station interface
288+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
289+# is known to not have the regression issue in packet socket behavior with
290+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
291+#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
292+
293+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
294+CONFIG_PEERKEY=y
295+
296+# IEEE 802.11w (management frame protection), also known as PMF
297+# Driver support is also needed for IEEE 802.11w.
298+#CONFIG_IEEE80211W=y
299+
300+# Select TLS implementation
301+# openssl = OpenSSL (default)
302+# gnutls = GnuTLS
303+# internal = Internal TLSv1 implementation (experimental)
304+# none = Empty template
305+#CONFIG_TLS=openssl
306+
307+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
308+# can be enabled to get a stronger construction of messages when block ciphers
309+# are used. It should be noted that some existing TLS v1.0 -based
310+# implementation may not be compatible with TLS v1.1 message (ClientHello is
311+# sent prior to negotiating which version will be used)
312+#CONFIG_TLSV11=y
313+
314+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
315+# can be enabled to enable use of stronger crypto algorithms. It should be
316+# noted that some existing TLS v1.0 -based implementation may not be compatible
317+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
318+# will be used)
319+#CONFIG_TLSV12=y
320+
321+# If CONFIG_TLS=internal is used, additional library and include paths are
322+# needed for LibTomMath. Alternatively, an integrated, minimal version of
323+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
324+# and drawbacks of this option.
325+#CONFIG_INTERNAL_LIBTOMMATH=y
326+#ifndef CONFIG_INTERNAL_LIBTOMMATH
327+#LTM_PATH=/usr/src/libtommath-0.39
328+#CFLAGS += -I$(LTM_PATH)
329+#LIBS += -L$(LTM_PATH)
330+#LIBS_p += -L$(LTM_PATH)
331+#endif
332+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
333+# can be configured to include faster routines for exptmod, sqr, and div to
334+# speed up DH and RSA calculation considerably
335+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
336+
337+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
338+# This is only for Windows builds and requires WMI-related header files and
339+# WbemUuid.Lib from Platform SDK even when building with MinGW.
340+#CONFIG_NDIS_EVENTS_INTEGRATED=y
341+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
342+
343+# Add support for old DBus control interface
344+# (fi.epitest.hostap.WPASupplicant)
345+#CONFIG_CTRL_IFACE_DBUS=n
346+
347+# Add support for new DBus control interface
348+# (fi.w1.hostap.wpa_supplicant1)
349+# CONFIG_CTRL_IFACE_DBUS_NEW=n
350+
351+# Add introspection support for new DBus control interface
352+# CONFIG_CTRL_IFACE_DBUS_INTRO=n
353+
354+# Add support for loading EAP methods dynamically as shared libraries.
355+# When this option is enabled, each EAP method can be either included
356+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
357+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
358+# be loaded in the beginning of the wpa_supplicant configuration file
359+# (see load_dynamic_eap parameter in the example file) before being used in
360+# the network blocks.
361+#
362+# Note that some shared parts of EAP methods are included in the main program
363+# and in order to be able to use dynamic EAP methods using these parts, the
364+# main program must have been build with the EAP method enabled (=y or =dyn).
365+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
366+# unless at least one of them was included in the main build to force inclusion
367+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
368+# in the main build to be able to load these methods dynamically.
369+#
370+# Please also note that using dynamic libraries will increase the total binary
371+# size. Thus, it may not be the best option for targets that have limited
372+# amount of memory/flash.
373+#CONFIG_DYNAMIC_EAP_METHODS=y
374+
375+# IEEE Std 802.11r-2008 (Fast BSS Transition)
376+#CONFIG_IEEE80211R=y
377+
378+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
379+CONFIG_DEBUG_FILE=y
380+
381+# Send debug messages to syslog instead of stdout
382+CONFIG_DEBUG_SYSLOG=y
383+# Set syslog facility for debug messages
384+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
385+
386+# Add support for sending all debug messages (regardless of debug verbosity)
387+# to the Linux kernel tracing facility. This helps debug the entire stack by
388+# making it easy to record everything happening from the driver up into the
389+# same file, e.g., using trace-cmd.
390+#CONFIG_DEBUG_LINUX_TRACING=y
391+
392+# Add support for writing debug log to Android logcat instead of standard
393+# output
394+#CONFIG_ANDROID_LOG=y
395+
396+# Enable privilege separation (see README 'Privilege separation' for details)
397+#CONFIG_PRIVSEP=y
398+
399+# Enable mitigation against certain attacks against TKIP by delaying Michael
400+# MIC error reports by a random amount of time between 0 and 60 seconds
401+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
402+
403+# Enable tracing code for developer debugging
404+# This tracks use of memory allocations and other registrations and reports
405+# incorrect use with a backtrace of call (or allocation) location.
406+#CONFIG_WPA_TRACE=y
407+# For BSD, uncomment these.
408+#LIBS += -lexecinfo
409+#LIBS_p += -lexecinfo
410+#LIBS_c += -lexecinfo
411+
412+# Use libbfd to get more details for developer debugging
413+# This enables use of libbfd to get more detailed symbols for the backtraces
414+# generated by CONFIG_WPA_TRACE=y.
415+#CONFIG_WPA_TRACE_BFD=y
416+# For BSD, uncomment these.
417+#LIBS += -lbfd -liberty -lz
418+#LIBS_p += -lbfd -liberty -lz
419+#LIBS_c += -lbfd -liberty -lz
420+
421+# wpa_supplicant depends on strong random number generation being available
422+# from the operating system. os_get_random() function is used to fetch random
423+# data when needed, e.g., for key generation. On Linux and BSD systems, this
424+# works by reading /dev/urandom. It should be noted that the OS entropy pool
425+# needs to be properly initialized before wpa_supplicant is started. This is
426+# important especially on embedded devices that do not have a hardware random
427+# number generator and may by default start up with minimal entropy available
428+# for random number generation.
429+#
430+# As a safety net, wpa_supplicant is by default trying to internally collect
431+# additional entropy for generating random data to mix in with the data fetched
432+# from the OS. This by itself is not considered to be very strong, but it may
433+# help in cases where the system pool is not initialized properly. However, it
434+# is very strongly recommended that the system pool is initialized with enough
435+# entropy either by using hardware assisted random number generator or by
436+# storing state over device reboots.
437+#
438+# wpa_supplicant can be configured to maintain its own entropy store over
439+# restarts to enhance random number generation. This is not perfect, but it is
440+# much more secure than using the same sequence of random numbers after every
441+# reboot. This can be enabled with -e<entropy file> command line option. The
442+# specified file needs to be readable and writable by wpa_supplicant.
443+#
444+# If the os_get_random() is known to provide strong random data (e.g., on
445+# Linux/BSD, the board in question is known to have reliable source of random
446+# data from /dev/urandom), the internal wpa_supplicant random pool can be
447+# disabled. This will save some in binary size and CPU use. However, this
448+# should only be considered for builds that are known to be used on devices
449+# that meet the requirements described above.
450+CONFIG_NO_RANDOM_POOL=y
451+
452+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
453+#CONFIG_IEEE80211N=y
454+
455+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
456+# (depends on CONFIG_IEEE80211N)
457+#CONFIG_IEEE80211AC=y
458+
459+# Wireless Network Management (IEEE Std 802.11v-2011)
460+# Note: This is experimental and not complete implementation.
461+#CONFIG_WNM=y
462+
463+# Interworking (IEEE 802.11u)
464+# This can be used to enable functionality to improve interworking with
465+# external networks (GAS/ANQP to learn more about the networks and network
466+# selection based on available credentials).
467+#CONFIG_INTERWORKING=y
468+
469+# Hotspot 2.0
470+#CONFIG_HS20=y
471+
472+# Enable interface matching in wpa_supplicant
473+CONFIG_MATCH_IFACE=y
474+
475+# Disable roaming in wpa_supplicant
476+#CONFIG_NO_ROAMING=y
477+
478+# AP mode operations with wpa_supplicant
479+# This can be used for controlling AP mode operations with wpa_supplicant. It
480+# should be noted that this is mainly aimed at simple cases like
481+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
482+# external RADIUS server can be supported with hostapd.
483+CONFIG_AP=y
484+
485+# P2P (Wi-Fi Direct)
486+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
487+# more information on P2P operations.
488+CONFIG_P2P=y
489+
490+# Enable TDLS support
491+#CONFIG_TDLS=y
492+
493+# Wi-Fi Direct
494+# This can be used to enable Wi-Fi Direct extensions for P2P using an external
495+# program to control the additional information exchanges in the messages.
496+#CONFIG_WIFI_DISPLAY=y
497+
498+# Autoscan
499+# This can be used to enable automatic scan support in wpa_supplicant.
500+# See wpa_supplicant.conf for more information on autoscan usage.
501+#
502+# Enabling directly a module will enable autoscan support.
503+# For exponential module:
504+#CONFIG_AUTOSCAN_EXPONENTIAL=y
505+# For periodic module:
506+#CONFIG_AUTOSCAN_PERIODIC=y
507+
508+# Password (and passphrase, etc.) backend for external storage
509+# These optional mechanisms can be used to add support for storing passwords
510+# and other secrets in external (to wpa_supplicant) location. This allows, for
511+# example, operating system specific key storage to be used
512+#
513+# External password backend for testing purposes (developer use)
514+#CONFIG_EXT_PASSWORD_TEST=y
515+
516+# Enable Fast Session Transfer (FST)
517+#CONFIG_FST=y
518+
519+# Enable CLI commands for FST testing
520+#CONFIG_FST_TEST=y
521+
522+# OS X builds. This is only for building eapol_test.
523+#CONFIG_OSX=y
524+
525+# Automatic Channel Selection
526+# This will allow wpa_supplicant to pick the channel automatically when channel
527+# is set to "0".
528+#
529+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
530+# to "channel=0". This would enable us to eventually add other ACS algorithms in
531+# similar way.
532+#
533+# Automatic selection is currently only done through initialization, later on
534+# we hope to do background checks to keep us moving to more ideal channels as
535+# time goes by. ACS is currently only supported through the nl80211 driver and
536+# your driver must have survey dump capability that is filled by the driver
537+# during scanning.
538+#
539+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
540+# a newly to create wpa_supplicant.conf variable acs_num_scans.
541+#
542+# Supported ACS drivers:
543+# * ath9k
544+# * ath5k
545+# * ath10k
546+#
547+# For more details refer to:
548+# http://wireless.kernel.org/en/users/Documentation/acs
549+#CONFIG_ACS=y
550+
551+# Support Multi Band Operation
552+#CONFIG_MBO=y

 1@@ -0,0 +1,24 @@
 2+#!/bin/sh
 3+# wifi — wireless network service using wpa_supplicant
 4+
 5+# check for wpa_supplicant
 6+if ! which wpa_supplicant >/dev/null 2>&1; then
 7+	echo "error: wpa_supplicant not found"
 8+	echo "install wpa_supplicant first"
 9+	exit 1
10+fi
11+
12+# detect wireless interfaces
13+WLAN_IF=$(ip link show | awk -F: '/^[0-9]+: wl/ {print $2; exit}' | tr -d ' ')
14+
15+if [ -z "$WLAN_IF" ]; then
16+	echo "error: no wireless interface found"
17+	echo "check that wireless drivers are loaded"
18+	exit 1
19+fi
20+
21+echo "wifi: initializing wpa_supplicant using $WLAN_IF"
22+wpa_supplicant -B -i "$WLAN_IF" -c /etc/wpa.conf
23+
24+echo "wifi: configuring with udhcpc"
25+udhcpc -i "$WLAN_IF"

1@@ -0,0 +1,2 @@
2+#!/bin/sh
3+exec wpa_supplicant -c /etc/wpa_supplicant.conf 2>&1

1@@ -0,0 +1,6 @@
2+name: links
3+description: text browser
4+license: 
5+upstream: https://links.twibright.com
6+version: 2.30
7+maintainer: chld

1@@ -0,0 +1,7 @@
2+#!/bin/sh -ue
3+NAME=links
4+VERSION=2.30
5+RELEASE=1
6+SOURCE="http://links.twibright.com/download/${NAME}-${VERSION}.tar.gz"
7+
8+. ${0%/*}/../../libsh/libdmake.sh